UTT-1000Digital load tester (tonnage calibrator)


UTT series digital load tester is a force (load) instrument with high test accuracy, which can easily calibrate and test the load of presses, hydraulic presses and other forging equipment.

2. Product Features
• Range: 1000t
• Automatically display the tonnage value after each stamping;
• Peak display mode;
• Automatic shutdown function, automatic shutdown within 5 minutes without operation;
• Built-in rechargeable battery, economical and practical;
Three, technical parameters
• Detection range: 30t~1000t;
• Display accuracy: 1t;
• Comprehensive error: ±1% (F.S);
• Non-linearity: ±0.3% (F.S);
• Repeat accuracy: ±0.2% (F.S);
• Temperature range -20℃~50℃;
• Overload capacity: 120% (F.S);
• Display: 4-digit digital tube;
• Bearing surface size: Φ230mm
• Equipment size: 328mm(L)*280mm(W)*240mm(H)
• Equipment weight: 72Kg;



Description:

Autocell is a load cell based on its own strain gauge. It has been calibrated with equipment that conforms to the ASTM E74-91 standard before leaving the factory.

Implement ISO/IEC 17025 and ANSI/NCSL Z540-1-1994 standards. Calibration and testing presses are now fast and convenient, and there is no need to connect the load cell to a portable display instrument. That is, AutoCell is a calibration system that is small in size, simple to use, and does not require a large number of settings and the addition of secondary display instruments and cables. Everyone can use it, and the tonnage can be read quickly by putting AutoCell on the press. With AutoCell, people with rich practical experience but no professional analysis technology can now easily detect problems such as the parallelism between the slider and the bed, and calibrate and test the press.

Function introduction:
*Automatically update the tonnage of each stamping —- automatically display the tonnage value of each load cell after stamping.
*Digital tonnage display can be used for accurate press debugging-the data measured by the load cell can make the press debugging work convenient and relatively simple. It is a scientific actual measurement rather than a guess.
*Accuracy of load cell—-The displayed tonnage is in increments of 1 ton.
*Digital peak tonnage mode—-AutoCell displays the peak tonnage during the stroke of the press, and can also display the static pressure continuously.
*Calibrated load cell —- The calibrated load cell is made of high-quality 4340 steel, and its life span exceeds any one on the market today. AutoCell can be used to calibrate press tonnage calibration, press tonnage at work, production/tonnage monitor, hydraulic overload, etc.
*More effective slider parallel detection —- It is necessary to use AutoCell to measure the parallelism of the slider. Our AutoCell has been processed into a precision contour body to ensure that the tools provided are accurate.
*Safety—-The load cell has a built-in limit of 50% overload rate to meet the wider use range of the press.
*Practical/low cost—-AutoCell itself digitally displays the tonnage value, so there is no need to purchase additional instruments or cables to display the load.
*Easy to carry—-AutoCell has an optional dedicated carrying case, which makes it easier to walk through the workshop.
*Automatic shutdown timer function—-AutoCell can automatically shut down the system when it is not used for more than 3 minutes, just restart it and press the START button. The battery is a standard 9V battery, so it is easy to replace.
* Accurate measurement of load distribution —- It is recommended to use two load cells on the C-type press and four load cells on the closed press to verify the load distribution characteristics of the press. AutoCell can be used alone or in 2 or 4 pairs.